Tile Coasters

I have tile from a house project and thought of an idea for the smaller tiles. I decided to make a monogrammed coaster.  I printed out the letter on printer paper, cut the fabric, a silk like number with decorative scissors and spray painted the tile.

Lined up, ready for glue

This time I decided to try Mod Podge glue, then spray with clear gloss paint.   So I modpodged on the fabric and then the letter,let dry, then several layers of clear spray paint (you can get  in the spray paint section) on top for a coating.

The finished project.  I put an embellishment (glass beads)around the tile with a glue gun.  I was happy with my first attempt.  I will next glue a piece of felt to the bottom of the tile, and it is ready for wrapping.  I also thought of wrapping a trim around the edge as an alternative, many variations are possible.  A ribbon at top or bottom,perhaps?

Thanksgiving 2012

We were invited to my favorite aunt's and uncle's for Thanksgiving.  We have soo much fun when we go down to SD to visit and eat.  Visiting and eating and music are always on the agenda.  They are getting up in years but that doesn't keep them from having fun.

Diana Nuttall Reints in the back and Steve Reints in foreground.  Sitting next to me are guests.

Smiling, eating, Steve brought the cider from Oak Glen

My cousin, who cooked, my Uncle Jim and Aunt Teresa- my daughter, Chris is taking the pix

Stuffed Bell Peppers

We harvested the last of the peppers from our garden. we got of ton of peppers this year from such a small area.

I thought , wow, I have got to make my famous stuffed pepper recipe.  So here it is:

8 medium peppers
½ c. chopped onion
1 lb ground beef
½ c. canned corn or 12 oz whole kernel corn, drained
1 t. Worcestershire sauce
1 8oz. seasoned tomato sauce
¾  t. salt
2 c. shredded sharp cheese
1 c. soft buttered bread crumbs



Cut off tops of peppers and simmer in a little water for 10 min, covered.
Brown onion and meat, then add the rest of ingred except the cheese and bread. Add the cheese last until melted.
Fill the peppers, and add the bread crumbs to the top of the peppers.  Bake in baking dish with a little water at bottom at 350 degrees for 40 min.

After softening in simmering water

Stuff with meat mixture

Top with butter bread, bake 350 for 40 min

A long time favorite

Handmade kitchen towels

I am making gifts for Christmas and will be sharing some of the things I did. I made personalized kitchen towels with three elements, a trim, a decoration, and the name.  Many things can be made with this formula: pillowcases, towels, pockets, totes, try it!

Finished kitchen towels

Step one:  I used a cording foot that has holes for the embroidery floss to go thru while zigzagging it down.  I used invisible thread and a multiple zigzag stitch. There are 4 threads of floss in each hole.

Note!  This is just one way to trim the edge.  Rickrack or ribbon or trim would work, too

Here I am finishing the row with the embroidery floss.

Second Step:  Adding the decoration.  I choose squares of unfinished fabric.  I first backed the squares with iron on pellon, pinned, and sewed around each square.

Third step:  Personalization.  Printout your caption on paper, place it under the towel, and trace.  Then either, embroidery by hand or free hand stitching by machine.  I can show you how to do that if you are interested.  Either way does not take long and it a makes a nice gift for anyone.

Bias ruffle on a Tee

Today I wanted to use the same bias ruffle technique on a child's t-shirt.  I made the bias trim and pinned it across the front and stitched.  The look could go from sweet to funky.

Tutorial: Refashion a T-shirt with a Ruffle Front

I like cutting apart tees and making them cuter.  Here is a tutorial on adding a bias tape with a matching ruffle to finish a cut edge.  A useful technique for adults and children's clothing.  First pick out a cute tee that need some new life!

This is what it will look when you are done.

 This is made with a ruffled piece of bias fabric and two pieces of unruffled bias that look like this and I am going to show you have to make them.  One is folded in half and gathered, the other is folded on both sides and folded again to make the bias tape (like the store bought kind)

The first step is to cut down the center front of the tee.  You do not need to finish the edge of knits so now go to the next step,  cutting some bias strips from some cute fabric.  I cut 2 1/2 in wide because I like that size when folded in half for the ruffle.  As you see here, the unruffled bias pieces are folded in half and in half again, all from the same 2 1/2 in wide strips.

About to make a Tee into a layering piece, love it.

Strips cut on the bias, I cut 2  1/2 inches wide.

Set aside two strips for the front of the t-shirt; get the rest ready for sewing together and making into a ruffle.

These strips will go down the two front sides.

Now pin the ends of the ruffle strips together end to end to make a long strip.  1/4" seam allowance is good.

Pin the strips this way and then sew.

Then to the ironing board to press the ruffle strips;  fold then in half lengthwise  and press.  Now you have a loooong strip ready to ruffle.  Wait, what to do with the other two pieces?  Fold and press them, too, but press each lengthwise end in to meet the middle of the strip, then fold again in half.  You will have two bias strips with the side ends tucked  in. See beginning photo for example.You will not ruffle these two pieces.

Now place a piece of dental floss or heavy thread or thin cord down on the seam allowance of the ruffle piece and zigzag over it.

I placed dental floss on the 1/4 seam allowance and zigzagged over it. Here you see the ruffle piece folded in half and I am sewing near the raw edge.

 When  you are thru zigzagging, either tie a big knot at  one tail end or loop the dental floss end around and around a pin that has been pinned in at the tail end of the piece.  After that, pull the floss until you get the kind of ruffle you want.

Pull the cord and lets ruffle, it is stronger and easier than two lines of running threads

At this point you have a ruffle- yea- and two pieces of bias tape, ok!  Almost done.  Sandwich the ruffle in between the bias tape and pin.  Ready for sewing.

Sewing the bias to the ruffle now.

Bias tape sandwich on the left and ruffle sandwiched in , now stitching it.

Laying it down so just the ruffle hangs over the edge, then pin.

Last step!  Lay the whole thing- you will have two pieces of bias tape with a ruffle- so lay it over the t-shirt edge and sew again.  I like to sew a double stitch, over the first row and then a second row so there is a row going down both side of the bias strip.

Double rows of stitching now to attach cute ruffle to the t-shirt.  Yes, if any zigs show, pick them out here and there.  No one is perfect.

Here is the end result, write me if you have any questions, I am going to do this on a small girl's Tee to show you how that looks so stay tuned.